MITUTOYO DP-1VA DATA PROCESSOR

SERIES 264 – Digimatic Mini-Processor

FEATURES:

• A gage with SPC output is connected to the DP-1VA with an SPC cable.
• The data for each part measured is printed or sent directly to a PC through a USB cable.
• This data can be triggered by the button on the gage, cable or the DP-1VA. The footswitch can also be used.
• Data Logger: Data can be stored internally, printed and/or sent to a PC as it is measured or after all data has been collected. Up to 1,000 measurements can be stored.
• Timer: Data collection can be triggered by a timer function. The DP-1VA can collect data unattended to measure changes over time.
• Tolerance and SPC: Tolerances can be set in the unit and statistics can be calculated and printed directly from the DP-1VA. No additional software is required.
• The digimatic 2 function allows the high resolution of the gage to be output in its entirety in metric or inch.
• Thermal line printer (Width 2.28"/58mm, Length 1,889"/48m).
• Data Input: Digimatic, Digimatic 2, RS-232C (for KA Counter Only).
• Data Output: USB Output, RS-232C output at TTL level, Tolerance judgement result output (GO, ±NG).
• Power Supply: 100V 50/60 Hz AC Adapter (6V, 2A) – Standard Accessory, (4) AA Alkaline Batteries (not included).
• Dimensions: 3.70" x 7.91" x 2.95" (94 × 201 × 75mm).

MITUTOYO DP-1VA DATA PROCESSOR WITH SPC