Browse Categories

1/4X3/4X36IN. 0-1 FLAT STOCK

1/4X3/4X36IN. 0-1 FLAT STOCK
Item #: 1-965-230

Product Info

STARRETT


No. 496 Oil Hardening – Standard

FEATURES:

  • Stock is dimensionally stable, use it for the most intricate work.
  • Deep hardening characteristics and fine grain structure.
  • Machines freely, fully spheroidized, annealed.
  • Full length identification eliminates confusion with other steels.

HARDENING:

  • It is recommended that stock be heated uniformly to 1,450°F to 1,500°F and quenched in oil.
  • Temperature of the quenching oil should be 120°F to 140°F for best results.
  • Do not quench in water because this is an oil hardening steel.

TEMPERING:

  • For maximum toughness, a tempering time of one hour at 1,450°F to 1,500°F is recommended (quench – oil, Rockwell C – 63 to 65).
  • Following table may also be used as a guide, depending on type of work:

– Cutting tools: 300°F to 350°F (light straw). – Solid punches and dies: 400°F to 450°F (straw). – Spring temper: 750°F to 800°F (blue).

TOLERANCES:

  • Thickness – ±.001".
  • Width – Up to 8" .000/.005", 9" and over .000/.015", squares ±.010".
  • Length – 36" + 5/8", Saw cut oversize to allow for finish cutting.
  • Squareness – Edge All: .003 per inch, Finish: 35 microinch or finer.

NOMINAL ANALYSIS (AISI 0-1):

  • Carbon – .90
  • Chromium – .50
  • Manganese – 1.20
  • Tungsten – .50
  • Vanadium – .20

ALSO AVAILABLE (Please Inquire):

  • 36" 0-1 Oil Hardening – Oversize.


1/4X3/4X36IN. 0-1 FLAT STOCK

Item Specifications

  • 36"
  • 1/4"
  • Oil Hardening
  • 3/4"
  • 1.912 lbs per EA
$54.74
Regular Price: $64.40
UOM : EA
QTY:
Add to Cart

Have Questions?

Ask our experts: